Twin Turbo TA

I have started collecting parts for a bit now. Hopefully it will be done next summer sometime.

Stainless Works down and forward turbo headers


TC 76/68 journal bearing turbos


Radiator and Fans



I also already have an eboost2 boost controller, two 46mm precision wastegates, and XSPower BOV

thats a pretty cool story

dbmustanggt asked so I replied. Sounds like you are little jelly to me!

I AM VERY JELLY

Nice build! Did I buy some welds rts form u awhile ago?

Nope sorry, not me.

I ordered the cam this week, motor is at the builders right now getting gone through and heads freshened up. Hoping to have the motor back in the car by Feb. sometime. Then the fabrication will begin for the turbo kit.

I'm going to twin supercharge and twin turbo my F150! yeah.. be scared

Update:

Build changed directions - I bought a LSX block and TFSs 6bolt heads. I shouldn't have a problem maxing these turbos out now. My 200lbs injectors showed up as well. Trying to decide on crank and rods right now for the rotating assembly, need something to hold in the 1500hp range. The motor will be a 430 stroker (maybe bigger depending on if the block needs to be cleaned up and it shouldn't according to the guy I bought it from).

I will post pics when the block arrives sometime next week I hope.

I got some pics from the guy I got my LSX block from!

A little update, I sold the headers pictured above and am going to with manifolds. The block posted below is getting sold and going with a new dart LS next gen block.

Here is what is will be going in and on top of the new Dart Ls next gen block!
DragonSlayer crank with billet reluctor whee, Callies ultra billet h-beam rods , 6bolt TFS heads from BTR , comp trunion upgrade, and a custom cam by LiljonMotorsportSolutions.



The Dart Ls next gen block is on order but it looks like it won't be here for another month or so. I also have a Precision Metal Craft sheet-metal intake on order as well. It should be here by the end of the month, and I will get pics up once it comes in.

Some of the fabrication and mock so far done by LS1NOVA. All of the piping showed up this week so next week the fabbing of the hotside begins. We are going to use truck manifolds and stainless steel for the hotside. The cold side will be dual a2w froozen boost intercoolers recommended by LilJon.


Intercooler mock up!


Radiator support made and radiator mounted.


Hanging the turbos for placement. Going with 3.5inch DPs with a PA super turbo k-member.

Of course there is a lot more history with this car but that is quick overview of its life. I can't wait to break that 1000rhwp mark!

I'm excited to see this in action